1. XY-1 Core Drilling Rig
For more information
XY-1 drilling rig is a portable hydraulic rig
1. Application Range
(1) Geological exploration, physical geography exploration road and building exploration，and drilling hole for blasting, etc.
(2) Diamond bits, hard alloy bits and steel-shot bits could be selected to meet different layers.
(3) Suitable for 2 to 9 stages siliceous skin clay and bedding course etc. layers.
(4) The nominal drilling depth is 100 meters; the maximum depth is 120 meters. The nominal diameter of initial hole is 110 mm, the maximum diameter of initial hole is 130 mm，and the diameter of final hole is 75 mm. The drilling depth depends on different conditions of stratum.
(5) Compact size and use same base for the installation of rig，water pump and diesel engine，just need small space.
(6) Light in weight, easy to assemble, disassemble and transport, suitable for plain and mountain areas
.
2. Main Features
(1) Easy operation and high efficiency with the hydraulic feeding.
(2) As the ball type chuck and the driving rod， it can complete no-stopping rotating while the spindle relit.
(3) The pressure indicator of bottom hole can be observed and the well conditions controlled easily.
(4) Close levers，convenient to operate，safe and reliable.
(5) Compact size and use same base for the installation of rig，water pump and diesel engine，just need small space.
(6) Light in weight，easy to assemble，disassemble and transport, suitable for plains and mountain area.
3. Technical Specifications
(1) Fundamental parameters
Maximum drilling depth: 100 m
Diameter of the initial hole: 110 mm
Diameter of the final hole: 75 mm
Diameter of drilling rod: 42 mm
Angle of drilling: 90°- 75°
Overall dimension (L x W x H): 1640 x 1030 x 1440 mm
Total weight (not include power unit) : 500 Kg
(2) Rotation unit
Spindle speed (3 positions): 142，285，570 rpm
Spindle stroke: 450 mm
Max. Feeding pressure: 15 KN
Max. Lifting capacity: 25 KN
Max. lifting speed without load: 3 m/min
(3) Hosting
Max. Lifting capacity (single wire): 10 KN
Rotation speed of drum: 55， 110， 220 rpm
Diameter of the drum: 145 mm
Circumferential velocity of the drum: 0.42， 0.84， 1.68 m/s
Diameter of the wire rope: 9.3 mm
Spool capacity: 27 m
Brake diameter: 230 mm
Brake band width: 50 mm
(4) Water pump
Type: horizontal，single cylinder，double acting
Maximum displacement:
With electrical motor: 77 L/min
With diesel engine: 95L/min
Maximum pressure: 1.2 MPa Operating pressure: 0.7 MPa
Diameter of liner: 80 mm Stroke of piston: 100 mm
(5) Hydraulic oil pump
Type: gear-pump Model: YBC - 12/80
Nominal pressure: 8 MPa Flow: 8ml/r
Nominal speed: 1500 rpm
(6) Power unit
Type of diesel: ZS11 00
Rated power: 10.3 KW
Rated rotating speed: 2000 rpm
Type of electrical motor: Y132M - 4
Rated rotating speed: 1440 rpm
Rated power: 7.5 KW
2. XY-1A Core Drilling Rig
For more information:
XY-1A drill is a portable hydraulic rig which on high speed. To meet the needs of different customers with widely practical use, XY-1A (YJ ) Model drill, which is added with travel lower chuck; And a advance XY-1A-4 Model drill，which is added with water pump; rig，water pump and diesel engine installed on same base.
1. Application Range
(1) Geological exploration，engineering geology investigation and kinds of survey holes in concrete structures.
(2) Diamond bits， hard metal bits and steel-shot bits could be selected to different layers
(3) The rated drilling depth is 100m using dia. 75mm bit，and 180m using dia. 46mm bit. The drilling depth cannot exceed 110% of its capacity. The allowable maximum diameter of initial hole is 150 mm.
2. Main Features
(1) Easy operation and high efficiency with the hydraulic feeding.
(2) As the ball type chuck and the driving rod，it can complete no-stopping rotating while the spindle relit.
(3)The pressure indicator of bottom hole can be observed and the well conditions controlled easily.
(4) Close levers，convenient to operate，safe and reliable.
(5) Compact size and light in weight，easy to assemble，disassemble and transport，suitable for plains and mountain area.
(6) The octagon shape section spindle can give more torque.
3. Technical Specifications
(1) Fundamental parameters
Drilling depth: 100, 180 m
Max. Diameter of the initial hole: 150 mm
Diameter of the final hole: 75, 46 mm
Diameter of drilling rod: 42， 43 mm
Angle of drilling: 90° - 75°
Overall dimension (L x W x H)
XY-1A: 1433 x 697 x 1274 mm
XY-1A-4: 1700 x 780 x 1274 mm
XY-1A (YJ): 1620 x 970 x 1560 mm
Total weight (not include power unit)
XY-1A: 420 Kg
XY-1A-4: 490 Kg
XY-1A(YJ): 620 Kg
(2) Rotation unit
Spindle speed (5 positions): 1010，790，470，295，140 rpm
Spindle stroke: 450 mm
Maximum feeding pressure: 15 KN
Maximum lifting capacity: 25 KN
(3) Hosting
Single wire lifting capacity: 11 KN
Rotation speed of drum: 121，76，36 rpm
Drum circumferential velocity (two layers) : 1.05， 0.66， 0.31 m/s
Diameter of the wire rope: 9.3 m
Spool capacity: 35 mm
(4) Hydraulic oil pump
Model: YBC-12/80
Nominal pressures: 8MPa
Flow: 8mll/r
Nominal speed: 1500 rpm
(5) Power unit
Type of electrical motor: Y160M - 4
Rated power: 11 KW
Rated rotating speed: 1460 rpm
Type of diesel: ZS1105
Rated rotating speed: 2200 rpm
Rated power: 12.1KW
3. XY-1B Core Drilling Rig
For more information:
XY-1B Drilling Rig is a hydraulic-feed low speed drilling rig. To meet the needs of different consume with widely practical use，drilling rig，which is added with water pump. The rig，water pump and diesel engine are installed on same base. XY-1B-2 Model drill，which is added with travel lower chuck.
1. Application Range
Engineering geological explorations for railway，highway, bridge and dam etc; Geologic core drilling and geophysical exploration. Drill the holes for small grouting， blasting and small water well. The rated drilling depth is 150 meters.
2. Main Feature
(1) Being equipped with ball type holding device and hexagonal Kelly，it can accomplish no-stopping working while lifting the rods，thus drilling efficiency increase. Operate conveniently，secure and reliable.
(2) Through the pressure indicator of bottom hole, the well condition can be observed easily. Close levers，convenient operation.
(3)The hoist spindle1s supported by the ball bearing，it could e1immate the event of the supporting bearing burned-out. Under the spindle head，there is a well top plate for unscrewing the rods conveniently.
(4) Compact size and small weight. Easy to dismantle and transport，adapt to work in plain and mountain areas.
(5) The octagon shape section spindle can give more torque.
3. Specifications
(1). Fundamental parameters
Hole diameter: 59， 75， 91， 110， 130， 150 mm
Drilling depth: 200， 150， 100， 70， 50， 30 m
Rod diameter: 42 mm
Drilling angle: 90° - 75°
- Overall dimensions (L x W x H)
XY-1B: 1433 x 697 x 1273 mm
XY-1B-1: 1750x 780x 1273 mm
XY-1B-2: 1780x 697x 1650 mm
- Drill weight (exclude power)
XY-1B: 525 Kg
XY-1 B-1: 595 Kg
XY-1B-2: 700 Kg
(2). Rotation unit
Spindle speed (4 shift): 71，142，310，620 rpm
Spindle stroke: 450 mm
Max. Spindle lifting speed without load: 0.05 m/s
Max. spindle downward without load: 0.067 m/s
Max. Feeding pressure: 15 KN
Max. Lifting capacity: 25 KN
Max. Spindle output torque: 1.25 KN.m
(3). Hoist
Lifting capacity (single line): 15 KN
Drum speed: 19，38，84，168 rpm
Drum circumferential velocity (second layer): 0.166，0.331，0.733， 1.465 m/s
Drum diameter: 140 mm
Wire rope diameter: 9.3 mm
Brake diameter: 252 mm
Brake band broad: 50 mm
(4). Hydraulic Oil pump
Type: YBC-12/80 Rated pressure: 8MPa
Flow: 8 ml/r Rated speed: 1500 rpm
(5). Power unit
- Diesel engine
Type: ZS11051
Rated power: 12.1 KW
Rated speed: 2200rpm
- Electric motor
Type: Y160M-4
Rated power: 11 KW
Rated speed: 1460 rpm
4. XY-2B Core Drilling Rig
For more information:
XY-2B drilling rig is type of vertical shaft drill, which can be powered by diesel engine or electric motor. It is mainly used for diamond bit drilling and carbide bit drilling of solid bed. It also can be used in exploring drilling and base or pile hole drilling.
(2) High speed and suitable range of speed to meet varies need of small diameter diamond bit drilling，big carbide bit drilling and all kinds of the engineer holes.
(3) Hydraulic systems can adjust the feeding pressure and the speed，so it can satisfy the drilling in various stratums.
(4) Pressure gauging can make you get the information about the feeding pressure at the end of the hole.
(5) Transmission and clutch of Automobile are choice in order to achieve the good generalization， easy repairing and maintenance.
(6) Close levers，convenient operation.
(7) The spindle has the octagon section so give more torgue.
2. Specifications
Fundamental parameters
Drilling depth: 76 mm 300 m
219 mm 150 m
500 mm 50 m
Rod diameter: 50, 60 mm
Drilling angle: 70°~ 90°
Overall dimension (L x W x H): 2500*1100*1700 mm
Rig weight: with diesel engine: 1550Kg
with electric motor: 1450Kg
Rotation
Spindle speed
Co-rotation: 70, 146, 179, 267, 370, 450, 677,1145 r/min
Reverse rotation: 62, 157 r/min
Spindle stroke: 550mm
Spindle pulling force: 68KN
Spindle feeding force: 46KN
Maximum output torque: 2550nm
Hoist
Lifting speed: 0.64, 1.33, 2.44 m/s
Lifting capacity: 25, 15, 7.5 kn
Cable diameter: 15mm
Drum diameter: 200mm
Brake diameter: 350mm
Brake band width: 74mm
Frame moving device
Frame moving stroke: 420mm
Distance away from hole: 300mm
Hydraulic oil pump
Type: CB-25
Rated flow: 40L/min
Rated pressure: 8MPA
Power unit
Diesel engine: N485Q
Rated power: 24.6kw
Rated speed: 1800r/min
Electric motor: Y180L-4
Rated power: 22KW
Rated speed: 1450 r/min
5. XY-3B Core Drilling Rig
For more information:
XY-3B drilling rig is type of vertical shaft drill, which can be powered by diesel engine or electric motor. It is mainly used for diamond bit drilling and carbide bit drilling of solid bed. It also can be used in exploring drilling and base or pile hole drilling.
1. Main Feature
(1) Compact size and light in weight of mechanical transmission，major diameter of vertical shaft, long distance of support span and good rigidity，hexagonal Kelly ensure the torque transfer.
(2) High speed and suitable range of speed to meet varies need of small diameter diamond bit drilling，big carbide bit drilling and all kinds of the engineer holes.
(3) Hydraulic systems can adjust the feeding pressure and the speed，so it can satisfy the drilling in various stratums.
(4) Pressure gauging can make you get the information about the feeding pressure at the end of the hole.
(5) Transmission and clutch of Automobile are choice in order to achieve the good generalization, easy repairing and maintenance.
(6)Close levers，convenient operation.
(7) The spindle has the octagon section so give more torgue.
2. Specifications
Fundamental parameters
Drilling depth: 76mm 600m
273mm 150m
500mm 80m
800mm 50m
Rod diameter: 50, 60mm
Drilling angle: 70°~ 90°
Overall dimension (L x W x H): 2500*1100*1700mm
Rig weight with diesel engine: 1650Kg
with electric motor: 1550Kg
Rotation
Spindle speed
Co-rotation: 75, 135, 160, 280, 355, 495, 615, 1030 r/min
Reverse rotation: 64, 160 r/min
Spindle stroke: 550mm
Spindle pulling force: 68KN
Spindle feeding force: 46KN
Maximum output torque: 3550nm
Hoist
Lifting speed: 0.31, 0.62, 1.18, 2.0 m/s
Lifting capacity: 30 KN
Cable diameter: 15mm
Drum diameter: 264mm
Brake diameter: 460mm
Brake band width: 90mm
Frame moving device
Frame moving stroke: 420mm
Distance away from hole: 300mm
Hydraulic oil pump
Type: CBW-E320
Rated flow: 40L/min
Rated pressure: 8MPa
Power unit
Diesel engine: CZ4102
Rated power: 35.3KW
Rated speed: 2000r/min
Electric motor: Y200L-4
Rated power: 30KW
Rated speed: 1450 r/min
6. XY-280 Core Drilling Rig
For more information:
XY-280 drilling rig is type of vertical shaft drill. It equips L28 diesel motor which is made from Changzhou diesel engine factory. It is mainly used for diamond bit drilling and carbide bit drilling of solid bed. It also can be used in exploring drilling and base or pile hole drilling.
1. Main Feature
(2) High speed and suitable range of speed to meet varies need of small diameter diamond bit drilling，big carbide bit drilling and all kinds of the engineer holes.
(3) Hydraulic systems can adjust the feeding pressure and the speed，so it can satisfy the drilling in various stratums.
(4) Pressure gauging can make you get the information about the feeding pressure at the end of the hole.
(5) Transmission and clutch of Automobile are choice in order to achieve the good generalization, easy repairing and maintenance.
(6) Close levers，convenient operation.
(7) Motor start by electricity, reduce labour force.
(8) The spindle has the octagon section so give more torgue.
2. Specifications
(1) Fundamental parameters
Bit size Drilling depth:
59mm 280m
75mm 200m
91mm 150m
110mm 100m
273mm 50m
350mm 30m
Rod diameter: 50mm
Drilling angle: 0°-90°
Overall dimensions: 2000*980*1500 mm
Overall weight (without motor): 1000kg
(2) Rotation unit
Co-rotation: 93, 207, 306, 399, 680, 888 r/min
Reverse rotation: 70, 155 r/min
Spindle stroke: 510 mm
Maximum pulling up force: 49KN
Maximum feeding force: 29KN
Maximum output torque: 1600n.m
(3) Hoist
Lifting speed: 0.34, 0.75, 1.10 m/s
Lifting force: 20KN
Cable diameter: 12mm
Drum diameter: 170mm
Brake diameter: 296mm
Brake band broad: 60mm
(4) Frame moving device
Frame moving stroke: 420mm
Distance away from hole: 250mm
(5) Hydraulic Oil pump
Type: YBC12-125 (L)
Rated flow: 18L/min
Rated pressure: 10mpa
Rated speed: 2500 r/min
(6) Power unit
Type: L28
Rated power: 20KW
Rated speed: 2200 r/min
7. XYL-I, XYL-IA, XYL-IB, XYL-IA-4, XYL-IB-1 Crawler Series Drilling Rig
For more information:
XYL-1 (1A， 18， 1A-4， 18-1) Drilling Rig is XY-1 (1A， 18， 1A-4， 18-1) drilling rig that mounted on the rubber crawlers. These drills move easily，with hydraulic feeding.
1. Application Range
Engineering geological explorations for railway, hydropower, highway, bridge and dam etc.; Geologic core drilling and geophysical exploration. Drill the holes for small grouting and blasting.
2. Structural Configuration
The drilling rig includes crawler chassis，diesel engine and drilling main body; All these parts will be mounted on one frame. The diesel engine drives drill， hydraulic oil pump and crawler chassis，the power will be transferred to drill and crawler chassis through transfer case.
3. Main Feature
(1) Being equipped with rubber crawler make the drilling rig moving easily. At the same time，the rubber crawlers won't destroy the ground，so this kind of drilling rig will be convenient for construction in city.
(2) Being equipped with hydraulic oil pressure feeding system improves drilling efficiency and reduces labor intensity.
(3) Being equipped with ball type holding device and hexagonal Kelly，it can accomplish no-stopping working while lifting the rods and get a high drilling efficiency. Operate with convenience，security and reliability.
(4) Through the pressure indicator of bottom hole, the well condition can be observed easily.
(5) Having Hydraulic mast，convenient operation.
(6) Close levers，convenient operation.
(7) The diesel engine starts by the electromotor.
4. Specifications
About the specifications of drilling，please refer to XY-1 (1A， 1 B， 1A-4， 1 B-1) drilling rig
(1) Rubber crawler chassis
Theoretical velocity Normal speed: s 0.9， 2.0， 2.7， 3.2， 6.3， 10 Km/h
Reverse speed: 2.1 Km/h
Rated traction power: 6 KN
Grade climbing: 20° (upgrade and downgrade)
Side tilting angle: 25°
Ground clearance: 200 mm
Width of crawler: 300 mm
Center distance of crawler: 1610 mm
Ground contact length of crawler: 1080 mm
Ground contact pressure of crawler: 35 KPa
(2) Drive system
Turning: single side brake and differential gear turning
Clutch: dry，two pieces，normal engaged clutch
Transmission case: integral gearbox
Control: double control levers
Overall length of crawler: 4500 mm
Pitch of crawler: 100 mm
(3) Overall dimensions (L x W x H): 3493 x 1170 x 2208 mm
(4) Drill weight: 2580 - 2660 Kg
For more detailed information about products, please contact us:
Company name: HAI (CAMBODIA) SURVEY & CONSTRUCTION CO., LTD
Head office: #06, Street D, Krang Tnorng Sangkat, Sen Sok Khan, Phnom Penh, Cambodia
Mobile phone: +855 71 866 7303 / +84 38 768 7101
Website: www.haicam.com E-mail: khoa.haicambodia@gmail.com
Very pleased to cooperate with you.
Thank & Best Regards!
